The 92% Accuracy Trap: Everything You Need to Know
ਪੀ.ਐੱਸ.ਐੱਸ.ਐੱਸ.ਬੀ. ਟਾਈਪਿੰਗ ਨਿਯਮ 2025
If your accuracy is 91.9% or below, you will FAIL the test - regardless of your typing speed.
Even typing at 50 WPM wont help if accuracy is below 92%. Focus on accuracy first!
Minimum required speed for Raavi font
Minimum required speed for English
Gross WPM = (Total Characters ÷ 5) ÷ Time in Minutes
Example: If you type 1500 characters in 10 minutes:
• Gross WPM = (1500 ÷ 5) ÷ 10 = 300 ÷ 10 = 30 WPM
Note: One word = 5 characters (including spaces). This is the standard measure.
Accuracy = (Correct Characters ÷ Total Characters) × 100
Example: If you typed 1500 characters with 120 mistakes:
• Correct = 1500 - 120 = 1380 characters
• Accuracy = (1380 ÷ 1500) × 100 = 92% ✓ Pass
✓ Yes, Backspace IS allowed in PSSSB typing tests
However, using backspace has consequences:
Pro Tip: Use backspace only for critical errors. Minor mistakes at the end are better than wasting time correcting small errors.
| Criteria | Requirement | Result |
|---|---|---|
| Speed ≥ 30 WPM, Accuracy ≥ 92% | Both met | ✓ PASS |
| Speed ≥ 30 WPM, Accuracy < 92% | Accuracy not met | ✗ FAIL |
| Speed < 30 WPM, Accuracy ≥ 92% | Speed not met | ✗ FAIL |
| Speed < 30 WPM, Accuracy < 92% | Both not met | ✗ FAIL |
The typing test rules mentioned on this page are based on official PSSSB notifications and exam guidelines. For the most current and authoritative information, please refer to:
Note: Rules may vary slightly between different recruitment drives. Always check the official notification for your specific exam. The 30 WPM and 92% accuracy requirements mentioned here are the standard for most PSSSB typing tests.
The Punjab Subordinate Services Selection Board (PSSSB) was established to conduct recruitment for Group C and D posts in Punjab government departments. Typing tests have been a crucial component of clerical recruitment since the board's inception.
Over the years, the typing test format has evolved:
The standardization of Raavi font (Unicode) has made it easier for candidates to practice on their personal computers, as the font comes pre-installed on Windows systems.
The "Chunk" system is unique to Punjab government typing tests. Unlike regular typing tests where you type continuously, PSSSB divides the passage into blocks (chunks) of approximately 30 words each.
Why this system? The chunk system prevents candidates from skipping difficult sections and ensures everyone attempts the complete passage. It also simulates real-world data entry where you often type from physical documents in sections.
No, you must use the keyboards provided at the exam center. Practice on standard keyboards to avoid surprises. Our simulator uses the standard Raavi keyboard layout.
Inform the invigilator immediately. They will help you switch to Punjabi keyboard (Win + Space). This is rare as systems are pre-configured.
No negative marking per se, but mistakes reduce your accuracy. If accuracy falls below 92%, you fail regardless of speed. Focus on minimizing errors.
Usually no. Official results are announced later with the merit list. However, you can estimate your performance based on how much you typed and errors made.
Exam centers have backup power. Your progress is usually saved. If there's a major disruption, the exam may be rescheduled for affected candidates.
Note: Exact typing requirements may vary by position. Some may require only English typing, while others need both Punjabi and English. Check your specific exam notification.
Our PSSSB Exam Simulator uses the exact chunk system, 80% completion rule, and 92% accuracy requirement. Experience the real exam interface before your test day.
🎯 Try PSSSB Simulator